formula confirmation

Discussion in 'Ask the Veterans' started by Steve H, Oct 14, 2016.

  1. Steve H

    Steve H Member

    Joined:
    Jun 12, 2016
    Location:
    Kapunda SA
    Just a quickie am going to help a friend with some VG/PG nic liquid as their supply is still on the way and just want to make sure I have worked out the amount of Nic base to add
    Nic base 100mg in Pg base
    making 125ml with a target of 20mg at 50/50
    24ml of 100mg nic base +37.2Ml pg +58.8 VG
    have I got that in the correct ballpark for the amounts and final target ?
     
  2. iamTezr

    iamTezr Senior Member

    Joined:
    Aug 24, 2016
    Location:
    4 Seasons in 1 day (Melb)
    Hi Steve,

    Using this : http://e-liquid-recipes.com/create
    It shows that you need:


    Nicotine juice 100 mg (100% PG) - 25ml
    PG dilutant -37.5ml
    VG dilutant - 62.5ml
    Total base - 125ml
    Totals - 125

    Target:
    Strength: 20 mg
    PG/VG-ratio: 50/50
    Flavor total: 0 ml (0%)
     
    embee and Judith like this.
  3. embee

    embee Senior Member U.S. Correspondent

    Joined:
    Jun 7, 2015
    Location:
    New York, USA
    Here's what my calculator came up with...

    Nicotine 100 mg (100% PG) - 25 ml
    PG - 37.5 ml
    VG - 62.5

    For future reference, just go here and plug in your numbers...
    http://e-liquid-recipes.com/create
     
    iamTezr and Judith like this.
  4. Judith

    Judith Mostly harmless

    Joined:
    Jun 2, 2015
    Location:
    Tasmania
    Snap. I did it on e-juice me up and got the same figures as TEZ and embee.
     
    iamTezr likes this.
  5. embee

    embee Senior Member U.S. Correspondent

    Joined:
    Jun 7, 2015
    Location:
    New York, USA
    Snap indeed.
     
  6. rupert

    rupert Crazy Chemist

    Joined:
    Jun 15, 2015
    Location:
    NE NSW and SE QLD
    Manual calcs ( because i don't like online calculators)-

    125 x 20 = 2500
    2500 / 100 = 25

    25mL of your base (PG) to achieve desired strength.
    37.5mL of additional PG added (include flavours in this amount if applicable).
    Total PG = 62.5mL.

    62.5mL of VG required.
     
    DogMan likes this.
  7. Steve H

    Steve H Member

    Joined:
    Jun 12, 2016
    Location:
    Kapunda SA
    Thanks all looking at your figures all seem close to the result i got from the online calculator i used just wanted to make sure that when i mix it its not going to be higher than what is required .
     

Share This Page