New vaping products

Discussion in 'General Vaping Discussion' started by Gasman, Mar 7, 2016.

  1. Gasman

    Gasman Senior Member

    Joined:
    Jun 12, 2015
    Location:
    Northern suburbs, Perth
    I thought it might be a good idea to start a thread so that any new vaping products that have been noticed could be put in one place. I asked Angela and it appears one did not exist on this forum...... but it does now!

    The idea being that opinions could be exchanged and it may also help someone decide if they want to spend their hard earned on a product from vapers you trust rather than an online reviewer. Others may pick out perspective faults that perhaps could be missed.

    I'll start it off with a new mod from Kanger called the Dripbox which is a squonker for from what I can tell approximately $40 U.S. This has been discussed on the squonkers are bonkers thread but I thought perhaps somebody who was thinking off trying a squonker would not visit that thread. For the price it may make it more enticing. I've watched a very short animated video of it but I'm not sure if the atty actually unscrews and you just unscrew the deck?

    Another one I've noticed is an RTA from EHPRO called the Bachelor which has a single coil deck and from what I've seen it appears to be relatively easy to build on but spare prebuilt coils/wicks are also available.It also appears like it might be a good mtl tank which certainly appeals to me. Cost wise I think it's approximately $25 U.S.
     
    Browny, Pippi, Catweazle and 7 others like this.
  2. Noe

    Noe Adorably quirky ... QUIRKY Noe! VCA Approved Post Whore

    Joined:
    Jun 2, 2015
    Location:
    Noewhere
    [​IMG]

    Looks good, I knew 2016 would see more squonk boxes coming out of China.
    • Juice capacity 7.0ml
    • Replaceable 18650 cell
    • Replaceable dripping coil
    • Comes in Black/ White/Red
    • Special battery cover design
    • Easy Juice filling,ease wicking
    • Max 60W output,drive 0.2ohm coil with all necessary mod protection
    [​IMG]
     
    Last edited: Mar 7, 2016
    Maria, Old Grump, Catweazle and 6 others like this.
  3. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD
  4. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD
    Innokin VTR?
    Aspire Plato?
     
    Browny and emu like this.
  5. Bandsaw

    Bandsaw Member

    Joined:
    Feb 15, 2016
    Location:
    Maitland NSW
    Found a new eGo AIO kit from Joyetech while searching online today. I made a post about it in the hardware section, that was before finding this thread lol.

    It has a 2mL topfill tank with 7 colour LED illumination, anti leak cup (whatever that is) and 1500mah battery. Comes with a 0.6 ohm SS316 coil, but it can apparently take the CUBIS coils and a RBA coil too.

    All for $29 AUD!!

    http://www.heavengifts.com/Joyetech-eGo-AIO-Quick-Start-Kit.html
     
    margyb, Gasman and Cloudy like this.
  6. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD
    Annette they made a thread for you!
     
    Pippi and Nico and Laughter like this.
  7. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD
    You like it I think? Looks cool...
     
    Bandsaw likes this.
  8. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD
  9. Gasman

    Gasman Senior Member

    Joined:
    Jun 12, 2015
    Location:
    Northern suburbs, Perth
    Maria, emu and Cloudy like this.
  10. Noe

    Noe Adorably quirky ... QUIRKY Noe! VCA Approved Post Whore

    Joined:
    Jun 2, 2015
    Location:
    Noewhere
    I don't think it will be, i might be wrong but it just looks like a BF RDA on top of the mod to me.
    I like how it has a screw in deck & a spare screw in deck that comes with it though, that's pretty cool.
    Maybe one is BF & the other is standard?
     
    emu, Gasman and Cloudy like this.
  11. Gasman

    Gasman Senior Member

    Joined:
    Jun 12, 2015
    Location:
    Northern suburbs, Perth
    Possibly, I didn't think of that.

    Personally I think this is a good move on Kangers part looking at the price point.
    Fair to say you're hardcore squonkers won't think much to it but for a vaper that is wondering what's squonking all about its the sort of money that could persuade them to try it out.

    It does seem incredibly cheap and I'm wondering about the quality but especially if that atty base is not attached I'll probably buy it depending on reviews and opinions.
     
    emu likes this.
  12. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
  13. Nico and Laughter

    Nico and Laughter Tinkerbell

    Joined:
    Jun 3, 2015
    Location:
    Wollongong the brave!
    Yeah I know right I love new stuff and I want everything!
     
    Pippi and Cloudy like this.
  14. Noe

    Noe Adorably quirky ... QUIRKY Noe! VCA Approved Post Whore

    Joined:
    Jun 2, 2015
    Location:
    Noewhere
    The specs say "max 60W" so to me this sounds more like a regulated but non adjustable box than a mech, the wattage is probably adjusted automatically to the ohms of the coil. So sort of mech-like but with all the safety features of a regulated box.
     
  15. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    that's the impression i got. like an ego battery with minimum 0.2ohm
     
    Nico and Laughter likes this.
  16. Nico and Laughter

    Nico and Laughter Tinkerbell

    Joined:
    Jun 3, 2015
    Location:
    Wollongong the brave!
    Some of the non ajustable batteries I've used stay at the same voltage from the begining to the end like the Endura but some start at a higher volt and drop like the ego one which shit me. I wonder what sort of of chip this will have.
     
    Cloudy and Noe like this.
  17. Noe

    Noe Adorably quirky ... QUIRKY Noe! VCA Approved Post Whore

    Joined:
    Jun 2, 2015
    Location:
    Noewhere
    This says "max 60W", so that suggests it is adjustable dependant on the ohms of the coil.
    So with that in mind, the obvious way to regulate it would be to keep the volts at the nominal 3.7V of most 18650 batteries & adjust the amps, thus as the power drains from the batt it would keep the volts constant.
     
  18. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    also says minimum 0.2 ohm

     
    Maria likes this.
  19. Bandsaw

    Bandsaw Member

    Joined:
    Feb 15, 2016
    Location:
    Maitland NSW
    It does look cool, although I can't see any airflow and that it looks like it's an All in One system. Not sure how it will go like that.
     
    Cloudy likes this.
  20. Cloudy

    Cloudy Senior Member

    Joined:
    Feb 2, 2016
    Location:
    Gold Coast QLD


    Anyone heard of the one, Evoke induction vape? Seems way out there.
     

Share This Page