the things i find on FT

Discussion in 'General Vaping Discussion' started by oxey, Jun 29, 2015.

  1. oxey

    oxey Member

    Joined:
    Jun 12, 2015
    Location:
    melbourne
    Broony, Nunga, margyb and 3 others like this.
  2. Angela

    Angela Admin

    Joined:
    Jun 2, 2015
    Location:
    Clunes, Victoria
    Nice one oxey. I've been known to snap up the odd bargain at FastTech. :clap:
     
  3. oxey

    oxey Member

    Joined:
    Jun 12, 2015
    Location:
    melbourne
    i got two orders on the way from them and just ordered the e vic vt as well but that one looks like its going to take awhile...
    these are some of the things i got coming going to try and get some vids of them but its been so cold and all my carma gear is set up in the grarge and its just so cold out there...

    https://www.fasttech.com/p/2256500
    https://www.fasttech.com/p/2301100
    https://www.fasttech.com/p/2330303

    one thing i recomend people not buy i repeate dont buy is the
    https://www.fasttech.com/p/2199602

    this this hold so little juce 1 to 2 vapes and you have to refill it and the air holes are so hard to line up, while it dose give grate flavour it's just two much of a pain in the ass


    also got a set of these coming
    https://www.fasttech.com/p/2399906

    while not vaping related throught they might help the kids stop wasting toothpaste
     
    IGsrGR8, Nunga and margyb like this.
  4. margyb

    margyb Senior Member

    Joined:
    Jun 11, 2015
    Location:
    Lindisfarne Tasmania
    LOL
    Love the lips oxey:wondering::wondering:
     
  5. oxey

    oxey Member

    Joined:
    Jun 12, 2015
    Location:
    melbourne
    me twoo hope they work they look grate
     
    margyb likes this.
  6. Nico and Laughter

    Nico and Laughter Tinkerbell

    Joined:
    Jun 3, 2015
    Location:
    Wollongong the brave!
    Sounds like you have fun oxey!
     
    oxey and margyb like this.
  7. BakerB

    BakerB Member

    Joined:
    Jun 13, 2015
    Location:
    Outer inner west Sydney
    I love ordering dodgy things with my order, toys for my 2yo that break within a week etc.

    Btw..they have subtank mini rba replacements on there now (just recieved today) they also have clones of them, although i think they don't have any peek insulators in them.
     
    Nunga likes this.
  8. Angela

    Angela Admin

    Joined:
    Jun 2, 2015
    Location:
    Clunes, Victoria
    Browny likes this.
  9. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    Browny and Angela like this.
  10. Tara

    Tara Member

    Joined:
    Jun 3, 2015
    Location:
    Perth
    Oxey I have that same kloud too. I agree, its a very tight draw but I don't think its too hard to line up the holes. There is markers there
    to show you where to line the cap up. Also, if you turn it so one of the holes is at the front (in front of the coil) its not as tight a draw.

    Its meant to be a dripper not a tank and I get a lot more than one or two vapes. If you are only getting one or two I think yours must be
    leaking :D

    Having said all that, I used it for a few days and put it away. It isnt the best RDA out there and I have better ones to take up space on the
    few mods I have.
     
  11. oxey

    oxey Member

    Joined:
    Jun 12, 2015
    Location:
    melbourne
    yer i c
    an see where the marker sposed to be but mine dosent have it compleated if it was there it would make things a lot easer.... but with out it the holes are very hard to line up.....mine only fits about 0.8 of a mill of liquid.. i take big draws.. most of my draws are about 10 sce.....so for me i chue through it in about 2 to 3 draws.....

    its a shame because the flavour that comes from it is grate but just to much of a pain in the ass to use... even if the lining up thingy on mine was compleate still dont think i would like it two much two menny flows... but hay u gotter try these things to know
     
  12. Tara

    Tara Member

    Joined:
    Jun 3, 2015
    Location:
    Perth
    Oh you mean have the marker on the cap as well? Mine doesn't have that either. I just line the airholes up with the marker on the
    bottom. I think having it on the cap (like I think you are suggesting) would make it even easier.

    I haven't measured how much juice I can fit in. I didn't bother taking too much notice cause I knew I wasn't going to be using it for
    too long. It is meant to be a dripper though so I tried to judge it as such.

    I agree, the flavour is pretty good so its a shame and you're right, you gotta try them out.....especially when something comes along
    thats a bit different from everything else :)
     
  13. Nunga

    Nunga Member

    Joined:
    Jun 21, 2015
    Location:
    Esperance WA
    Browny, Judith and Catweazle like this.
  14. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    I bought a tube mech and an orchid tank

    running it at 0.8ohm with an 18490 battery

    it is OK, but i feel like something is missing without squonking, and i always feel like it needs a squonk
     
    Nunga likes this.
  15. Catweazle

    Catweazle Minion

    Joined:
    Jun 2, 2015
    pix or it didn't happen

    everyone likes to get squonked every now and then :cancan:
     
  16. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    [​IMG]

    party like it's 2012
     
    Judith, Nunga and Catweazle like this.
  17. oxey

    oxey Member

    Joined:
    Jun 12, 2015
    Location:
    melbourne
  18. DogMan

    DogMan Butler

    Joined:
    Jun 3, 2015
    Location:
    S/E Melbourne
    ciggie brand oxey? the pack has loose leaf baccie
     
  19. laurie9300

    laurie9300 Armature Boy

    Joined:
    Jun 2, 2015
    Location:
    Western Sydney, Australia
  20. blaze

    blaze Member

    Joined:
    Jul 17, 2015
    Location:
    Bristol, UK

Share This Page